HPE FlexNetwork 5130 HI SERIES User Manual

166
Syntax
display snmp-agent usm-user [ engineid engineid | group group-name | username user-name ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
engineid engineid: Specifies an SNMP engine ID. The engine ID is case insensitive. When an
SNMPv3 user is created, the system records the local SNMP entity engine ID. The user becomes
invalid when the engine ID changes, and it becomes valid again when the recorded engine ID is
restored.
group group-name: Specifies an SNMP group by its name. The group name is case sensitive.
username user-name: Specifies an SNMPv3 user by its name. The username is case sensitive.
Usage guidelines
This command displays only SNMPv3 users that you have created by using the snmp-agent
usm-user v3 command. To display SNMPv1 or SNMPv2c users created by using the snmp-agent
usm-user { v1 | v2c } command, use the display snmp-agent community command.
Examples
# Display information about all SNMPv3 users.
<Sysname> display snmp-agent usm-user
Username: userv3
Group name: mygroupv3
Engine ID: 800063A203000FE240A1A6
Storage-type: nonVolatile
UserStatus: active
ACL: 2000
Username: userv3
Group name: mygroupv3
Engine ID: 8000259503000BB3100A508
Storage-type: nonVolatile
UserStatus: active
ACL name: testacl
Username: userv3code
Role name: groupv3code
network-operator
Engine ID: 800063A203000FE240A1A6
Storage-type: nonVolatile
UserStatus: active
Username: userv3code
Role name: snmprole
network-operator
Engine ID: 800063A280000002BB0001

HPE FlexNetwork 5130 HI SERIES Specifications

General

Brand	HPE
Model	FlexNetwork 5130 HI SERIES
Category	Switch
Language	English