Johnson Controls VS3 Series User Manual

191
Appendix A—Description of parameters
VARIABLE SPEED DRIVE SERIES III LIT-12012999—June 2018 www.johnsoncontrols.com
Code Modbus ID Parameter Application RO/RW
P10.1.9 549 OverVoltage Bypass Enable 1,2,3 RW
This parameter specifies whether an automatic switch to bypass when an overvoltage fault occurs.
0 = Disable Auto bypass on overvoltage fault
1 = Enable Auto bypass on overvoltage fault
P10.1.10 1698 Motor OverTemp Bypass Enable 1,2,3 RW
This parameter specifies whether an automatic switch to bypass when an Motor Overtemp fault occurs.
0 = Disable Auto bypass on Motor Overtemp fault
1 = Enable Auto bypass on Motor Overtemp fault
P10.1.11 1699 UnderLoad Bypass Enable 1,2,3 RW
This parameter specifies whether an automatic switch to bypass when an UnderLoad fault occurs.
0 = Disable Auto bypass on UnderLoad fault
1 = Enable Auto bypass on UnderLoad fault
P10.1.12 1700 External Bypass Enable 1,2,3 RW
This parameter specifies whether an automatic switch to bypass when an External fault occurs.
0 = Disable Auto bypass on External fault
1 = Enable Auto bypass on External fault
P10.1.13 1701 Charge Switch Fault Bypass Enable 1,2,3 RW
This parameter specifies whether an automatic switch to bypass when an Charge Switch fault occurs.
0 = Disable Auto bypass on Charge Switch fault
1 = Enable Auto bypass on Charge Switch fault
P10.1.14 1702 Saturation Trip Fault Bypass Enable 1,2,3 RW
This parameter specifies whether an automatic switch to bypass when an Saturation fault occurs.
0 = Disable Auto bypass on Saturation fault
1 = Enable Auto bypass on Saturation fault
P10.1.15 1703 Under Temp Fault Bypass Enable 1,2,3 RW
This parameter specifies whether an automatic switch to bypass when an UnderTemp fault occurs.
0 = Disable Auto bypass on UnderTemp fault
1 = Enable Auto bypass on UnderTemp fault
P10.1.16 1704 EEPROM Fault Bypass Enable 1,2,3 RW
This parameter specifies whether an automatic switch to bypass when an Charge Switch fault occurs.
0 = Disable Auto bypass on Charge Switch fault
1 = Enable Auto bypass on Charge Switch fault
P10.1.17 1705 FRAM Fault Bypass Enable 1,2,3 RW
This parameter specifies whether an automatic switch to bypass when an Charge Switch fault occurs.
0 = Disable Auto bypass on Charge Switch fault
1 = Enable Auto bypass on Charge Switch fault
P10.1.18 1706 Watchdog Fault Bypass Enable 1,2,3 RW
This parameter specifies whether an automatic switch to bypass when an Watchdog fault occurs.
0 = Disable Auto bypass on Watchdog fault
1 = Enable Auto bypass on Watchdog fault
P10.1.19 1707 Fan Cooling Fault Bypass Enable 1,2,3 RW
This parameter specifies whether an automatic switch to bypass when an Fan Cooling fault occurs.
0 = Disable Auto bypass on Fan Cooling fault
1 = Enable Auto bypass on Fan Cooling fault
P10.1.20 1708 Keypad Com Fault Bypass Enable 1,2,3 RW
This parameter specifies whether an automatic switch to bypass when an Keypad Communication
fault occurs.
0 = Disable Auto bypass on Keypad Communication fault
1 = Enable Auto bypass on Keypad Communication fault
P10.1.21 1709 Option Card Fault Bypass Enable 1,2,3 RW
This parameter specifies whether an automatic switch to bypass when an Charge Switch fault occurs.
0 = Disable Auto bypass on Charge Switch fault
1 = Enable Auto bypass on Charge Switch fault

Johnson Controls VS3 Series Specifications

General

Brand	Johnson Controls
Model	VS3 Series
Category	Inverter
Language	English