EasyManuals Logo

Juniper BGP - CONFIGURATION GUIDE V 11.1.X User Manual

Juniper BGP - CONFIGURATION GUIDE V 11.1.X
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #199 background imageLoading...
Page #199 background image
Reference count is 1
■ Example 5—Displays information about routes in the route-target address family
host1# show ip bgp route-target signaling
Local BGP identifier 13.13.13.13, local AS 100
4 routes (240 bytes)
3 destinations (228 bytes) of which 3 have a route
3 routes selected for route tables installation
0 unicast/multicast routes selected for route table installation
0 unicast/multicast tunnel-usable routes selected for route table
installation
0 tunnel-only routes selected for tunnel-route table installation
10 path attribute entries (1520 bytes)
Local-RIB version 19. FIB version 19.
Status codes: > best, * invalid, s suppressed, d dampened, r rejected,
a auto-summarized
Prefix Peer Next-hop MED LocPrf Weight
Origin
> 0:0:0/0 12.12.12.12 12.12.12.12 100 0
IGP
> 100:100:1/96 11.11.11.11 11.11.11.11 100 0
IGP
100:100:1/96 14.14.14.14 14.14.14.14 100 0
IGP
> 100:100:2/96 11.11.11.11 11.11.11.11 100 0
IGP
■ Example 6—Displays information for routes in the route-target address family
corresponding to the specified RT-MEM-NLRI
host1#show ip bgp route-target signaling 100:100:1/96
BGP route information for prefix 100:100:1/96
Received route learned from internal peer 11.11.11.11 (best route)
Route not placed in IP forwarding table
Best to advertise to both internal and external peers
Address Family Identifier (AFI) is ip-v4
Subsequent Address Family Identifier (SAFI) is route-target-signaling
Next hop IP address is 11.11.11.11 (metric 0)
Multi-exit discriminator is not present
Local preference is 100
Weight is 0
Origin is IGP
AS path is empty
Received route learned from internal peer 14.14.14.14
Route not placed in IP forwarding table
Do not advertise to any peers
Address Family Identifier (AFI) is ip-v4
Subsequent Address Family Identifier (SAFI) is route-target-signaling
Next hop IP address is 14.14.14.14 (metric 0)
Multi-exit discriminator is not present
Local preference is 100
Weight is 0
Origin is IGP
AS path is empty
■ Example 7—Displays for network routes in the route-target address family
Monitoring BGP â–  163
Chapter 1: Configuring BGP Routing

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper BGP - CONFIGURATION GUIDE V 11.1.X and is the answer not in the manual?

Juniper BGP - CONFIGURATION GUIDE V 11.1.X Specifications

General IconGeneral
BrandJuniper
ModelBGP - CONFIGURATION GUIDE V 11.1.X
CategorySoftware
LanguageEnglish

Related product manuals