■ Use the no version to remove the BGP process.
■ See router bgp.
Understanding BGP Command Scope
BGP commands can be sorted into the following categories, each of which has a
different scope; that is, each configures parameters within a different area of
applicability. Individual command descriptions in this chapter and in “Configuring
BGP-MPLS Applications” on page 379, provide more information about command
behavior.
■ The commands listed in Table 5 on page 18 configure parameters for the BGP
process globally, regardless of address family.
Table 5: Commands Affecting BGP Globally
bgp graceful-restart
path-selection-defer-time
bgp advertise-inactive
bgp graceful-restart restart-timebgp advertise best-external-to-internal
bgp graceful-restart stalepaths-timebgp always-compare-med
bgp log-neighbor-changesbgp bestpath med confed
bgp maxas-limitbgp bestpath missing-as-worst
bgp redistribute-internalbgp client-to-client reflection
bgp router-idbgp cluster-id
bgp shutdownbgp confederation identifier
ip bgp-community new-formatbgp confederation peers
overload shutdownbgp default local-preference
rib-out disablebgp default route-target filter
router bgpbgp enforce-first-as
timers bgpbgp fast-external-fallover
bgp graceful-restart
■ The commands listed in Table 6 on page 18 configure parameters for all address
families within the current VRF context.
Table 6: Commands Affecting All Address Families in a VRF
synchronizationdistance bgp
18 ■ Basic Configuration
JUNOSe 11.1.x BGP and MPLS Configuration Guide
To Next Page
Loading...
Need help?
General
