Juniper BGP - CONFIGURATION GUIDE V 11.1.X User Manual

Table 92: show bridge table Output Fields
Field DescriptionField Name
Name of the VPLS instance for which the MAC address table is
displayed
Bridge
MAC address of the entryAddress
Specifies how the VPLS instance handles this entry: forward or
discard
Action
Interface type and specifier on which the entry is forwarded; this
value does not appear for entries that are discarded; vpls identifies
the VPLS virtual core interface
Interface
Length of time that a dynamic entry has been in the forwarding
table; this value does not appear for static entries
Age
Related Topics ■ show bridge table
Monitoring Subscriber Policy Rules
Purpose Display the set of forwarding and filtering rules for all subscriber policies configured
on the router, or for a specified subscriber policy.
Action To display the rules for a specified subscriber policy:
host1#show subscriber-policy client01
Subscriber: client01
ARP : Permit
Broadcast : Permit
Multicast : Deny
Unknown Destination : Deny
IP : Permit
Unknown Protocol : Permit
Unicast : Permit
PPPoE : Permit
Relearn : Deny
Mpls : Permit
To display the rules for all default and nondefault subscriber policies configured on
the router:
host1#show subscriber-policy
Subscriber: default Subscriber
ARP : Permit
Broadcast : Deny
Multicast : Permit
Unknown Destination : Deny
IP : Permit
Unknown Protocol : Permit
630 ■ Monitoring Subscriber Policy Rules
JUNOSe 11.1.x BGP and MPLS Configuration Guide

Juniper BGP - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	BGP - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English