Resolution in IP route table of VR
IP indirect next-hop index 2
Reachable (metric 3)
Number of direct next-hops is 1
Direct next-hop ATM2/0.10 (10.10.10.2)
Resolution in IP tunnel-route table of VR
MPLS indirect next-hop index 19
Reachable (metric 3)
Number of direct next-hops is 1
Direct next-hop 0000000c
Reference count is 2
Meaning Table 96 on page 636 lists the show ip bgp next-hops command output fields.
Table 96: show ip bgp next-hops Output Fields
Field DescriptionField Name
BGP next-hop attribute received in the BGP update messageIndirect next-hop
Describes where the indirect next hop is resolved (the IP routing
table, the IP tunnel routing table, or both) and whether this is in a
VR or VRF
Resolution
Index number of the IP indirect next hop that corresponds to the
BGP indirect next hop and its resolution
IP indirect next-hop index
Index number of the MPLS indirect next hop that corresponds to
the BGP indirect next hop and its resolution
MPLS indirect next-hop
index
Indicates whether or not the indirect next hop is reachable. For
more information about the reachability rules that apply for various
route types, see the command description for show ip bgp
next-hops
Reachable
Metric number of the BGP indirect next hopmetric
Number of the equal-cost legs of direct next hops to which this
indirect next hop resolves
Number of direct next-hops
MPLS next-hop index that resolves the MPLS indirect next hopDirect next-hop
Number of label mappings of BGP routes that use this next hopReference count
Related Topics â– show ip bgp next-hops
Monitoring LDP-Related Settings for VPLS
Purpose Display MPLS configuration information for a VPLS instance that uses LDP as the
signaling protocol.
636 â– Monitoring LDP-Related Settings for VPLS
JUNOSe 11.1.x BGP and MPLS Configuration Guide
To Next Page
Loading...
Need help?
General
