To display summary information about MPLS minor interfaces:
host1:pe1#show mpls minor-interface brief
Lower Oper
Interface MplsMajor state Direction
---------------- --------- ----- ---------
pe1-to-pe2 ATM2/0.10 up transmit
lsp-02020202-1-4 ATM2/0.10 up receive
ERX-01-0c-d7:pe1#
Meaning Table 50 on page 351 lists the show mpls minor-interface command output fields.
Table 50: show mpls minor-interface Output Fields
Field DescriptionField Name
Specifier and status of each interfaceInterface
Related Topics â– show mpls minor-interface
Monitoring MPLS Next Hops
Purpose Display MPLS next hops and any available next-hop statistics.
Next hops can be pointed to by MPLS forwarding entries on an LSR, IP or IPv6 routes
on an LER, and VPLS bridge groups.
Action To display MPLS next hops:
host1:vr2#show mpls next-hop
MPLS next-hop: index 1, lookup on inner header/label
Statistics are not collected for MPLS switch-context next-hops
MPLS next-hop: index 2, lookup in router pe1
Statistics are not collected for MPLS switch-context next-hops
MPLS next-hop: index 22, ECMP next-hop, leg count 2
MPLS next-hop: index 20, label 36 on FastEthernet1/1.120, neighbor 10.120.120.1
MPLS next-hop: index 21, label 36 on ATM2/1.20, neighbor 10.20.20.1
Statistics are not collected for MPLS ECMP next-hops
MPLS next-hop: index 24, label 17, resolved by MPLS nextHop index 10
MPLS next-hop: index 10, resolved by MPLS nextHop index 14, peer address
10.1.1.1
MPLS next-hop: index 14, ECMP next-hop, leg count 2
MPLS next-hop: index 12, label 32 on FastEthernet1/1.120, neighbor
10.120.120.1
MPLS next-hop: index 13, label 32 on ATM2/1.20, neighbor 10.20.20.1
Sent:
0 packets
0 bytes
0 errors
0 discards
Monitoring MPLS Next Hops â– 351
Chapter 4: Monitoring MPLS
To Next Page
Loading...
Need help?
General
