Table 56: show mpls rsvp bfd interfaces Output Fields (continued)
Field DescriptionField Name
Detection multiplier value; roughly equivalent to the number of
packets that can be missed before the BFD session is declared to
be down
Multiplier
Related Topics â– show mpls rsvp bfd interfaces
Monitoring RSVP-TE Interface Counters
Purpose Display various counters for a particular RSVP-TE interface or all RSVP-TE interfaces.
Action To display counters for RSVP-TE interface atm 6/0.1:
host1#show mpls rsvp counters atm 6/0.1
Interface ATM6/0.1
Path Sent 247 Path Rcvd 0
Path Error Sent 0 Path Error Rcvd 0
Path Tear Sent 0 Path Tear Rcvd 0
Resv Sent 0 Resv Rcvd 245
Resv Error Sent 0 Resv Error Rcvd 0
Resv Tear Sent 0 Resv Tear Rcvd 0
Resv Conf Sent 0 Resv Conf Rcvd 0
SRefresh Sent 0 SRefresh Rcvd 0
Ack Sent 0 Ack Rcvd 0
Nack Objects Sent 0 Nack Objects Rcvd 0
Msg Bundles Sent 0 Msg Bundles Rcvd 0
Error Msgs Rcvd 0 Misordered Messages 0
Send Failures 0 Msgs not acked 0
Path Triggers 1 Resv Triggers 0
Forwarded Pkts 0
Hello Sent 7097 Hello Rcvd 7097
Hello Ack Sent 0 Hello Ack Rcvd 7097
Hello Discarded 0 Hello Ack Discarded 0
Hello Suppressed 0
Meaning Table 57 on page 360 lists the show mpls rsvp counters command output fields.
Table 57: show mpls rsvp counters Output Fields
Field DescriptionField Name
Number of path messages sent on the interfacePath Sent
Number of path messages received on the interfacePath Rcvd
Number of patherror messages sent on the interfacePath Error Sent
Number of patherror messages received on the interfacePath Error Rcvd
360 â– Monitoring RSVP-TE Interface Counters
JUNOSe 11.1.x BGP and MPLS Configuration Guide