Table 49: show mpls interface Output Fields (continued)
Field DescriptionField Name
Number of high-capacity (64-bit) packets received or senthcpkts
Number of packets that are dropped for some reason at receipt or
before being sent
errors
Number of packets that are discarded due to lack of buffer space
at receipt or before being sent
discards
Number of adjacencies currently establishedadjacency
Number of sessions currently establishedsession
Cumulative total number of adjacencies established since interface
is up
accum adjacency
Cumulative total number of sessions established since interface is
up
accum session
Number of hello messages receivedhello recv
Number of hello messages senthello sent
Number of hello messages rejectedhello rej
Number of adjacencies set upadj setup
Number of adjacencies deletedadj deleted
Related Topics â– show mpls interface
Monitoring MPLS Minor Interfaces
Purpose Display status and configuration information about MPLS minor interfaces.
The show mpls interface minor command displays the same information.
Action To display information about MPLS minor interfaces:
host1:pe1#show mpls minor-interface
MPLS minor interface pe1-to-pe2 (transmit)
Stacked on MPLS major ATM2/0.10
Operational state is up
Sent:
0 packets
0 bytes
queue 0: traffic class best-effort, bound to atm-vc ATM2/0.10
Queue length 0 bytes
Forwarded packets 0, bytes 0
Monitoring MPLS Minor Interfaces â– 349
Chapter 4: Monitoring MPLS
To Next Page
Loading...
Need help?
General
