Table 95: show ip bgp l2vpn Output Fields (continued)
Field DescriptionField Name
Status codes for the route, listed before the Prefix:
■>—best route
■*—invalid route
■s—suppressed route
■d—dampened route
■r—rejected route
■a—auto-summarized route
■m—multihomed backup route; not used to trigger pseudowire
Status codes
Route prefix in the format siteID:blockOffsetPrefix
IP address of the peer from which the route was learnedPeer
IP address of the next router that is used when a packet is
forwarded to the destination network
Next-hop (or Next hop IP
address)
Multiexit discriminator for the routeMED
Local preference for the routeLocPrf
Weight of the routeWeight
Origin of the routeOrigin
AS path through which this route has been advertisedAS path
Description of the extended communities associated with this route.
Includes route target, community type, encapsulation, control word
and sequencing use, L2VPN link MTU, layer 2 D-bit (Site-is-Down)
setting.
Extended communities
Related Topics show ip bgp l2vpnâ–
â– show ip bgp l2vpn vpls
Monitoring BGP Next Hops for VPLS
Purpose Display information about BGP next hops in the L2VPN address family or in the VPLS
address family.
Action To display next hop information that matches the specified indirect next-hop address
(2.2.2.2) in the L2VPN address family:
host1#show ip bgp l2vpn all next-hops 2.2.2.2
Indirect next-hop 2.2.2.2
Monitoring BGP Next Hops for VPLS â– 635
Chapter 11: Monitoring VPLS
To Next Page
Loading...
Need help?
General
