Related Topics ■ show atm vc
Monitoring Global Call Admission Control Configuration
Purpose Display global call admission control (CAC) configuration.
Action To display CAC configuration:
host1#show cac
resource info flood interval 180
Related Topics ■ show cac
Monitoring Interfaces Configured with Traffic Engineering Bandwidth Accounting
Purpose Display interfaces on which traffic engineering bandwidth accounting is configured.
Action To display information about CAC interfaces:
host1#show cac interface
atm2/0
bandwidth 10 kbps
IP/MPLS reserveable bw 10 kbps
current total available bw 10 kbps
MPLS TE flooding threshold:
up 15 30 45 60 75 80 85 90 95 96 97 98 99 100
down 100 99 98 97 96 95 90 85 80 75 60 45 30 15
MPLS TE administrative weight 0
MPLS TE attribute flags 0
Available BW at 8 priority levels:
0 10 kbps
1 10 kbps
2 10 kbps
3 10 kbps
4 10 kbps
5 10 kbps
6 10 kbps
7 10 kbps
Meaning Table 34 on page 322 lists the show cac interfacevc command output fields.
Table 34: show cac interface Output Fields
Field DescriptionField Name
Maximum physical bandwidth in Kbps; line ratebandwidth
Total bandwidth in Kbps that can be reserved for MPLS; includes
bandwidth that is already reserved as well as bandwidth not yet
reserved
IP/MPLS reserveable bw
322 ■ Monitoring Global Call Admission Control Configuration
JUNOSe 11.1.x BGP and MPLS Configuration Guide
To Next Page
Loading...