Juniper BGP - CONFIGURATION GUIDE V 11.1.X - Page 220

d63.65.12.0/24 192.168.1.158 192.168.1.1 0 inc.
d63.73.12.0/24 192.168.1.158 192.168.1.1 0 IGP
■ See show ip bgp neighbors dampened-routes.
■ See show bgp ipv6 neighbors dampened-routes.
show ip bgp neighbors paths
show bgp ipv6 neighbors paths
■ Use to display path information for the specified BGP neighbor.
■ This command displays only the most common path attributes. BGP internally
maintains additional attributes that are not displayed—for example, the MED,
local preference, and communities attributes.
■ Field descriptions
■ Address—Hexadecimal number that uniquely identifies the path attributes
■ Refcount—Number of routes that share the path attributes
■ Origin—Value of the origin path attribute
■ Next-hop—Value of the next-hop path attribute
■ AS-path—Value of the AS-path attribute
■ Example
host1# show ip bgp neighbors 1.02.3.4 paths
Address Refcount Origin Next-hop AS-path
0xC384BD0 1 IGP 192.168.1.1 11488 701 2853 5515 764
0xC384C40 1 IGP 192.168.1.1 11488 701 4183
0xC384CB0 1 IGP 192.168.1.1 11488 701 1239 1833 1833 1833 1299 8308
0xC384D20 1 IGP 192.168.1.1 11488 701 6453 786
0xC384D90 1 IGP 192.168.1.1 11488 701 6453 1103 1103
0xC384E00 1 IGP 192.168.1.1 11488 701 6762 9116 9116 9116 6888 6888
0xC384E70 1 IGP 192.168.1.1 11488 701 6453 8297 6758
0xC384EE0 1 IGP 192.168.1.1 11488 701 5511 3215
0xC384F50 1 IGP 192.168.1.1 11488 701 3561 5683 5551
0xC384FC0 1 IGP 192.168.1.1 11488 701 1239 1755 1273 8793 8793 8793
0xC385030 1 IGP 192.168.1.1 11488 701 5705 5693
■ See show ip bgp neighbors paths.
■ See show bgp ipv6 neighbors paths.
show ip bgp neighbors received prefix-filter
■ Use to display prefix-list outbound route filters received from the neighbor.
■ Field descriptions
■ seq—Sequence number of the entry in the prefix list
■ permit, deny—Condition statement for addresses matching the listed address
■ Example
184 ■ Monitoring BGP
JUNOSe 11.1.x BGP and MPLS Configuration Guide