Indirect next-hop 5.5.5.5
Reachable (metric 2)
Direct next-hop atm2/0.35 (35.35.35.5)
Reference count is 3
Indirect next-hop 6.6.6.6
Reachable (metric 3)
Direct next-hop atm2/0.34 (34.34.34.4)
atm2/0.35 (35.35.35.5)
Reference count is 3
Indirect next-hop 13.13.13.1
Not reachable
Reference count is 2
■ See show ip bgp next-hops.
■ See show bgp ipv6 next-hops.
show ip bgp paths
show bgp ipv6 paths
■ Use to display information about BGP paths.
■ This command displays only the most common path attributes. BGP internally
maintains additional attributes that are not displayed—for example, the MED,
local preference, and communities attributes.
■ Field descriptions
■ Address—Hexadecimal number that uniquely identifies the path attributes
■ Refcount—Number of routes that share the path attributes
■ Origin—Value of the origin path attribute
■ Next-hop—Value of the next-hop path attribute
■ AS-path—Value of the AS-path attribute
■ Example
host1#show bgp ipv6 paths
Address Refcount Metric AS-path
0x4B311118 1 100
0x4C548224 1 0 100
0x4C548530 1 0 200
0x4C548704 2 0 300
■ See show ip bgp paths.
■ See show bgp ipv6 paths.
show ip bgp peer-group
show bgp ipv6 peer-group
188 ■ Monitoring BGP
JUNOSe 11.1.x BGP and MPLS Configuration Guide
To Next Page
Loading...