Juniper BGP - CONFIGURATION GUIDE V 11.1.X

■ Route flap dampening—Status, enabled or disabled
■ Maximum number of equal-cost EBGP paths—Number of paths
■ Maximum number of equal-cost IBGP paths—Number of paths
■ Log neighbor changes—Status, enabled or disabled
■ Fast External Fallover—Status, enabled or disabled
■ No maximum received AS-path length—Indicates whether limit is set for AS
path length and, if set, the limit
■ BGP administrative distances—Distances for external, internal, and local
BGP routes
■ Router is a route reflector—Indicates whether the router has been configured
as a route reflector
■ Client-to-client reflection—Whether client-to-client reflection is configured
(enabled) or not (disabled)
■ Cluster ID—Identifying number for cluster ID
■ Route-target filter—Status, enabled or disabled
■ Default IPv4-unicast—Status, enabled or disabled
■ Redistribution of iBGP routes—Status, enabled or disabled
■ Check reachability of next-hops for VPN routes—Status, enabled or disabled
■ Graceful restart—Status, enabled or disabled
■ Global graceful-restart restart time—Time in seconds
■ Global graceful-restart stale paths time—Time in seconds
■ Graceful-restart path selection defer time—Time in seconds
■ Route Distinguisher—RD assigned to the VRF
■ Confederation ID—Confederation ID
■ Confederation peers—Confederation peers
■ Import route map—Route map associated with the VRF that filters and
modifies routes imported to the VRF from the global BGP VPN RIB. The map
applies to both IPv4 and IPv6 routes, unless the field name is preceded by
IPv4 (applies the map to only IPv4 routes) or IPv6 (applies the map to only
IPv6 routes).
■ Export route map—Route map associated with the VRF that modifies and
filters routes exported by the VRF to the global BGP VPN RIB. The map
applies to both IPv4 and IPv6 routes, unless the field name is preceded by
IPv4 (applies the map to only IPv4 routes) or IPv6 (applies the map to only
IPv6 routes). The can filter routes text appears only if the filter keyword was
issued for export map.
194 ■ Monitoring BGP
JUNOSe 11.1.x BGP and MPLS Configuration Guide