Operational MTU = 9180 Administrative MTU = 0
Operational speed = 155520000 Administrative speed = 0
Discontinuity Time = 0
Router advertisement = disabled
Administrative debounce-time = disabled
Operational debounce-time = disabled
Access routing = disabled
Multipath mode = hashed
In Received Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Packets 0, Bytes 0
In Policed Packets 0, Bytes 0
In Error Packets 0
In Invalid Source Address Packets 0
Out Forwarded Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Packets 0, Bytes 0
Out Scheduler Drops Committed Packets 0, Bytes 0
Out Scheduler Drops Conformed Packets 0, Bytes 0
Out Scheduler Drops Exceeded Packets 0, Bytes 0
Out Policed Packets 0, Bytes 0
host1#show ip interface vrf vpn1 brief
Interface IP-Address Status Protocol Description
null0 255.255.255.255 up up
atm4/0.77 7.8.7.7 up up
■ See show ip interface vrf.
show ip protocols
■ Use to display information about the routing protocols associated with the VRF.
■ You must specify the name of the VRF for which the protocols are displayed;
otherwise, the command displays all protocols configured on the router
■ Field descriptions
■ For BGP:
■ Redistributing—Protocol to which BGP is redistributing routes
■ Default local preference—Local preference value
■ IGP synchronization—Status of IGP synchronization: enabled, disabled
■ Always compare MED—Status of multiexit discrimination: enabled,
disabled
■ Router flap damping—Status of route dampening: enabled, disabled
■ Administrative Distance—External, internal, and local administrative
distances
■ Neighbor Address—IP address of the BGP neighbor
■ Neighbor Incoming/Outgoing update distribute list—Number of the
access list for outgoing routes
492 ■ Monitoring BGP/MPLS VPNs
JUNOSe 11.1.x BGP and MPLS Configuration Guide