EasyManua.ls Logo

Juniper BGP - CONFIGURATION GUIDE V 11.1.X - Page 536

Juniper BGP - CONFIGURATION GUIDE V 11.1.X
748 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MulticastNumber of multicast packets and bytes forwarded out an IP
interface
Out Requested Packets, BytesNumber of packets and bytes requested to
be forwarded out an IP interface
Out Total Dropped Packets, BytesTotal number packets and bytes dropped
by an IP interface on output
Out Scheduler Drops Committed Packets, BytesNumber of committed
packets and bytes dropped because of out queue threshold limit
Out Scheduler Drops Conformed Packets, BytesNumber of conformed
packets and bytes dropped because of out queue threshold limit
Out Scheduler Drops Exceeded Packets, BytesNumber of exceeded packets
and bytes dropped because of out queue threshold limit
Out Policed PacketsNumber of packets discarded on the egress interface
because of token bucket limiting
Out Discarded PacketsNumber of packets discarded on the egress interface
because of a configuration problem rather than a problem with the packet
itself
Out Fabric Dropped PacketsNumber of packets dropped because of internal
fabric congestion
Examples
host1:PE1#show ip vrf interfaces
Interface IP-Address Status Protocol VRF
null0 255.255.255.255/32 up up pe11
atm4/0.134 4.4.4.2/24 up up pe11
null0 255.255.255.255/32 up up pe12
ip0 6.6.6.8/24 up up pe12
null0 255.255.255.255/32 up up pe13
loopback1 7.7.7.2/24 up up pe13
host1:PE1#show ip vrf interfaces detail
null0 is up, line protocol is up
VRF: pe11
Link up/down trap is disabled
Internet address is 255.255.255.255/255.255.255.255
IP statistics:
Rcvd: 0 local destination
0 hdr errors, 0 addr errors
0 unkn proto, 0 discards
Frags: 0 reasm ok, 0 reasm req, 0 reasm fails
0 frag ok, 0 frag creates, 0 frag fails
Sent: 0 generated, 0 no routes, 0 discards
ICMP statistics:
Rcvd: 0 errors, 0 dst unreach, 0 time exceed
0 param probs, 0 src quench, 0 redirect,
0 echo req, 0 echo rpy
0 timestmp req, 0 timestmp rpy
0 addr mask req, 0 addr mask rpy
Sent: 0 errors, 0 dst unreach, 0 time excd
500 Monitoring BGP/MPLS VPNs
JUNOSe 11.1.x BGP and MPLS Configuration Guide

Table of Contents

Related product manuals