Juniper BGP - CONFIGURATION GUIDE V 11.1.X User Manual

Table 99: show vpls connections Output Fields (continued)
Field DescriptionField Name
IP address of the remote VPLS edge (VE) router, which is analogous
to the remote provider edge (PE) router in a BGP/MPLS VPN
configuration
Remote PE
Incoming MPLS label from the remote siteIn-label
Outgoing MPLS label used to reach the remote siteOut-label
MPLS next-hop index number that corresponds to the outgoing
MPLS label
MPLS NH Idx
Time since the last state change for this VPLS connectionUp-down Time
Related Topics ■ show vpls connections
642 ■ Monitoring VPLS-Specific Settings
JUNOSe 11.1.x BGP and MPLS Configuration Guide

Juniper BGP - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	BGP - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English