Clearing BGP Reachability Information for the L2VPN Address Family
To clear BGP reachability information for a specific VPWS instance in the L2VPN
address family:
â– Issue the clear ip bgp command and specify l2vpn vpws vpwsName.
host1#clear ip bgp l2vpn soft in
To clear BGP reachability information for all VPLS and VPWS instances in the L2VPN
address family:
â– Issue the clear ip bgp command and include the l2vpn all keywords.
host1#clear ip bgp l2vpn all soft in
Use the soft in keywords to trigger inbound soft reconfiguration. There is no no
version.
Clearing BGP Route Flap Dampening Information for the L2VPN Address Family
To clear route flap dampening information for a specific VPWS instance in the L2VPN
address family:
â– Issue the clear ip bgp dampening command and specify l2vpn vpws vpwsName.
host1#clear ip bgp l2vpn dampening l2vpn vpws l2vpnBoston
To clear route flap dampening information for all VPLS and VPWS instances in the
L2VPN address family:
â– Issue the clear ip bgp dampening command and include the l2vpn all keywords.
host1#clear ip bgp l2vpn all dampening
There is no no version.
Clearing the Wait for the End-of-RIB Marker for the L2VPN Address Family
To clear the wait for receiving an End-of-RIB marker from the peer for all VPWS
instances in the L2VPN address family:
â– Issue the clear ip bgp wait-end-of-rib command and specify l2vpn vpws
vpwsName.
host1#clear ip bgp l2vpn vpws l2vpnBoston wait-end-of-rib
To clear the wait for receiving an End-of-RIB marker from the peer for all VPLS and
VPWS instances in the L2VPN address family:
672 â– Clearing BGP Attributes for VPWS
JUNOSe 11.1.x BGP and MPLS Configuration Guide
To Next Page
Loading...
Need help?
General
