Juniper BGP - CONFIGURATION GUIDE V 11.1.X User Manual

host1#show l2vpn all
L2VPN: l2vpn1
Encapsulation Type Ethernet
Use of control word is preferred
Send sequence numbers
Route Distinguisher 100:11
Site Range 10
Sites:
Site Name boston Site Id 1
Route Targets:
Route Target: RT:100:1 both
L2VPN: l2vpn2
Encapsulation Type ATM AAL5 SDU VCC transport
Use of control word is preferred
Send sequence numbers
Route Distinguisher 100:12
Site Range 20
Sites:
Site Name westford Site Id 1
Site Name boston Site Id 3
Route Targets:
Route Target: RT:100:2 both
To display detailed information about all VPWS instances configured on the router:
host1#show l2vpn instance all detail
L2VPN: l2vpn1
Encapsulation Type Ethernet
Use of control word is preferred
Send sequence numbers
Route Distinguisher 100:11
Site Range 10
Sites:
Site Name boston Site Id 1
Route Targets:
Route Target: RT:100:1 both
Admin Oper
Interface Local-Site-Id Remote-Site-Id state state
--------------- ------------- -------------- ------- -----
FastEthernet4/1 1 2 enabled up
L2VPN: l2vpn2
Encapsulation Type ATM AAL5 SDU VCC transport
Use of control word is preferred
Send sequence numbers
Route Distinguisher 100:12
Site Range 20
Sites:
Site Name westford Site Id 1
Site Name boston Site Id 3
Route Targets:
Route Target: RT:100:2 both
Admin Oper
Interface Local-Site-Id Remote-Site-Id state state
---------- ------------- -------------- ------- -----
ATM2/0.122 1 2 enabled up
ATM2/0.123 1 3 enabled up
ATM2/0.124 3 1 enabled up
ATM2/0.121 3 2 enabled up
To display detailed information about a particular VPWS instance:
682 ■ Monitoring VPWS Instances
JUNOSe 11.1.x BGP and MPLS Configuration Guide

Juniper BGP - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	BGP - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English