Keithley 2700 User Manual

8-16 Triggering Model 2700 Multimeter/Switch System User’s Manual
Figure 8-10
Trigger model (remote operation)
Control
Source
Event
Detection
No
START
:INIT (:IMM)
or
:INIT:CONT ON
?
Yes
:ABOrt
*RCL 0
:SYST:PRES
*RST
:INIT (:IMM)
or
:INIT:CONT ON
?
No
Yes
Idle
and
Initiate
:Trigger:Source Immediate
:Trigger:Source External
:Trigger:Source Timer
:Trigger:Source Manual
:Trigger:Source BUS
:Trigger:Delay <n>
:Trigger:Delay:AUTO <b>
Another
Trigger
?
Output
Trigger
Another
Sample
?
Device
Action
Yes
No
Yes
No
:Trigger:Signal
:Sample:Count <n>
:Trigger:Count<n> | INFinity
Timer >
Delay
?
Timer
Enabled
?
Yes
No
Timer
Timer
Bypass
Yes
No
Delay
(Auto or Manual)

Keithley 2700 Specifications

General

Type	Digital Multimeter
Measurement Functions	DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Frequency Range	3 Hz to 500 kHz
Temperature Range	-200°C to +1372°C
Display	Vacuum Fluorescent Display
Connectivity	IEEE-488, RS-232
Channels	10
Power Supply	100V to 240V AC, 45Hz to 66Hz
DC Current Range	10 µA to 3 A
AC Current Range	10 µA to 3 A
Temperature Measurement	Thermocouple, RTD