Keithley 2700 - Page 370

Model 2700 Multimeter/Switch System User’s Manual SCPI Reference Tables 15-7
Table 15-4
ROUTe command summary
Command Description
Default
parameter
Ref SCPI
ROUTe
:MONitor <clist> Specify one channel to be monitored. Sec 7
:STATe <b> Enable or disable channel monitoring. OFF
:STATe? Query state of channel monitoring.
:DATA? Returns the most recent monitor reading.
:POINts <NRf> For a monitor scan, specify number of channels
to scan (2 to 55000).
(Note 1)
:POINts? For a monitor scan, query number of channels to scan.
:MONitor? Query the channel to be monitored.
:CLOSe <clist> Close the one specified channel (all others will
open).
Sec 2
:STATe? <clist> Query closed channels in specified list;
1 = closed.
:ACONfigure <b> Enable or disable auto-configure. (Note 2)
:ACONfigure? Query state of auto-configure.
:COUNt? <clist> Query closure count for specified channels. Sec 2
:INTerval <NRf> Set count update interval in minutes (10 to 1440). (Note 3)
:INTerval? Query relay count update interval.
:CLOSe? Returns a <clist> of closed channels.
:OPEN:ALL Open all channels. Sec 2