Keysight Technologies X Series Service Guide

628 Keysight N9010A EXA Service Guide
Post-Repair Procedures
Post-Repair Procedures
Figure 16-25 FPGA Programming Utility
To program the FPGA code enter 1 and press Enter. You will need to
confirm this selection by pressing 1 and Enter one more time.
8. The programming of the FPGA code could take a few minutes to complete.
Once it has finished the instrument will reboot itself to use the new code
and this process will then be completed.

Keysight Technologies X Series Specifications

General

Brand	Keysight Technologies
Model	X Series
Category	Measuring Instruments
Language	English