Keysight EXA N9010A User Manual

11 APD Measurement
SPAN X Scale
SPAN X Scale
Displays the menu keys that enable you to change the span parameters.
Key Path
Front-panel key
Notes Front panel only.
Initial S/W Revision A.13.00
Reference Level
The reference level specifies the amplitude represented by the right most graticule line on the X-axis.
Key Path
Span X Scale
Remote Command
:DISPlay:APD:VIEW[1]:WINDow[1]:TRACe:X[:SCALe]:RLEVel <real>
:DISPlay:APD:VIEW[1]:WINDow[1]:TRACe:X[:SCALe]:RLEVel?
Example DISP:APD:VIEW:WIND:TRAC:X:RLEV 80 dBuV
DISP:APD:VIEW:WIND:TRAC:X:RLEV?
Couplings If you reduce the attenuation, the analyzer may have to lower the reference level to keep it below its
allowed maximum. This allowed maximum level is specified in the “Max” row, below, along with
other variables which affect it.
When you increase attenuation, the reference level does not change.
Preset 106.98 dBuV
State Saved Saved in instrument state
Min RefLevelMin = –29.31dBuV - ExtGain.
Max RefLevelMax = 153.11 dBuV – External Gain
Default Unit Depends on the current selected Amplitude unit
Initial S/W Revision A.13.00
Scale/Div
This key enables you to enter a time value to change the horizontal scale.
Key Path
Span X Scale
Remote Command
:DISPlay:APD:VIEW[1]:WINDow[1]:TRACe:X[:SCALe]:PDIVision <rel_ampl>
:DISPlay:APD:VIEW[1]:WINDow[1]:TRACe:X[:SCALe]:PDIVision?
Example DISP:APD:VIEW:WIND:TRAC:X:PDIV 10
DISP:APD:VIEW:WIND:TRAC:X:PDIV?
Preset 10
State Saved Saved in instrument state
Min 1.0
EMI Receiver Mode Reference 1003

Keysight EXA N9010A Specifications

General

Brand	Keysight
Model	EXA N9010A
Category	Measuring Instruments
Language	English