6 System Functions
System
SCPI LAN
Activates a menu for identifying and changing the SCPI over a LAN configuration. There are a number of
different ways to send SCPI remote commands to the instrument over LAN. It can be a problem to have
multiple users simultaneously accessing the instrument over the LAN. These keys limit that somewhat by
disabling the telnet, socket, and/or SICL capability.
Key Path
System, I/O Config
Initial S/W Revision Prior to A.02.00
SCPI Telnet
Turns the SCPI LAN telnet capability On or Off allowing you to limit SCPI access over LAN through telnet.
Key Path
System, I/O Config, SCPI LAN
Mode All
Remote Command
:SYSTem:COMMunicate:LAN:SCPI:TELNet:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:TELNet:ENABle?
Example :SYST:COMM:LAN:SCPI:TELN:ENAB OFF
Preset This is unaffected by Preset but is set to ON with a “Restore System Defaults->Misc”
State Saved No
Range On | Off
Initial S/W Revision Prior to A.02.00
SCPI Socket
Turns the capability of establishing Socket LAN sessions On or Off. This allows you to limit SCPI access
over LAN through socket sessions.
Key Path
System, I/O Config, SCPI LAN
Mode All
Remote Command
:SYSTem:COMMunicate:LAN:SCPI:SOCKet:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:SOCKet:ENABle?
Example :SYST:COMM:LAN:SCPI:SOCK:ENAB OFF
Preset This is unaffected by a Preset but is set to ON with a “Restore System Defaults->Misc”
State Saved No
Range On | Off
Initial S/W Revision Prior to A.02.00
334 EMI Receiver Mode Reference
To Next Page
Loading...
Need help?
General
