6 System Functions
File
The :HCOPy command is equivalent to pressing the PRINT key. The HCOPy:ABORt command can be used
to abort a print which is already in progress. Sending HCOPy:ABORt will cause the analyzer to stop
sending data to the printer, although the printer may continue or even complete the print, depending on
how much data was sent to the printer before the user sent the ABORt command.
Key Path
Front-panel key
Remote Command
:HCOPy[:IMMediate]
Initial S/W Revision Prior to A.02.00
Key Path
SCPI command only
Remote Command
:HCOPy:ABORt
Initial S/W Revision Prior to A.02.00
Restore Down
This key allows you to Restore Down the Instrument Application and reverses the action taken by
Maximize. This key is only visible when the application has been maximized, and after the Restore Down
action has been completed this key is replaced by the Maximize key.
Key Path
File
Mode
All
Notes No equivalent remote command for this key.
State Saved No
Initial S/W Revision A.05.01
Minimize
The Minimize key causes the analyzer display to disappear down into the task bar, allowing you to see the
Windows Desktop. You can use Alt-Tab (press and hold the Alt key and press and release the Tab
key) to restore the analyzer display.
Key Path
File
Mode
All
Notes No equivalent remote command for this key.
State Saved No
Initial S/W Revision A.05.01
EMI Receiver Mode Reference 269
To Next Page
Loading...
Need help?
General
