10 Monitor Spectrum Measurement
Meas Setup
Edit Limit
Opens the Table Editor for the selected limit line.
Key Path
Meas Setup
Initial S/W Revision A.13.00
Navigate
Lets you move through the table to edit the desired point
Key Path
Meas Setup, Limits, Edit
Notes There is no value readback on the key
Min 1
Max 2000
Initial S/W Revision A.13.00
Frequency
Lets you edit the frequency of the current row.
Key Path
Meas Setup, Limits, Edit
Notes There is no value readback on the key
Min 0
Max 1 THz
Initial S/W Revision A.13.00
Amplitude
Lets you edit the Amplitude of the current row.
Key Path
Meas Setup, Limits, Edit
Notes There is no value readback on the key
Min –1000 dBm
Max 1000 dBm
Initial S/W Revision A.13.00
Insert Point Below
Pressing this key inserts a point below the current point. The new point is a copy of the current point. And
becomes the current point The new point is not yet entered into the underlying table, and the data in the
EMI Receiver Mode Reference 797
To Next Page
Loading...
Need help?
General
