10 Monitor Spectrum Measurement
Peak Search
Delta Next Peak Right (Remote Command Only)
Performs a Next Peak with the specified delta marker.
Remote Command
:CALCulate[1]|2:DELTamarker[1]|2|...|4:MAXimum:RIGHt
Example :CALC:DELT4:MAX:RIGH Performs a Next Peak Right with Delta Marker 4.
Backwards Compatibility
Notes
Aliased to :CALCulate:MONitor:MARKer[1]|2|3|4:RIGHt, however if the specified marker is not on or is
not a delta marker, the analyzer first turns it on and makes it a delta marker.
Initial S/W Revision A.13.00
Delta Next Peak Left (Remote Command Only)
Performs a Next Peak with the specified delta marker.
Remote Command
:CALCulate[1]|2:DELTamarker[1]|2|...|4:MAXimum:LEFT
Example :CALC:DELT4:MAX:LEFT Performs a Next Peak Left with Delta Marker 4.
Backwards Compatibility
Notes
Aliased to :CALCulate:MONitor:MARKer[1]|2|3|4:NEXT, however if the specified marker is not on or is
not a delta marker, the analyzer first turns it on and makes it a delta marker.
Initial S/W Revision A.13.00
Delta Min Peak Search (Remote Command Only)
Performs a Min Peak Search with the specified delta marker.
Remote Command
:CALCulate[1]|2:DELTamarker[1]|2|...|4:MINimum[:PEAK]
Example :CALC:DELT4:MIN Performs a Min Search with Marker 4.
Backwards Compatibility
Notes
Aliased to :CALCulate:MONitor:MARKer[1]|2|3|4:MINimum, however if the specified marker is not on
or is not a delta marker, the analyzer first turns it on and makes it a delta marker.
Initial S/W Revision A.13.00
820 EMI Receiver Mode Reference
To Next Page
Loading...
Need help?
General
