6 System Functions
Print
Print
This front-panel key is equivalent to performing a File, Print, OK. It immediately performs the currently
configured Print to the Default printer.
The :HCOPy command is equivalent to pressing the PRINT key. The HCOPy:ABORt command can be used
to abort a print which is already in progress. Sending HCOPy:ABORt will cause the analyzer to stop
sending data to the printer, although the printer may continue or even complete the print, depending on
how much data was sent to the printer before the user sent the ABORt command.
Key Path
Front-panel key
Remote Command
:HCOPy[:IMMediate]
Initial S/W Revision Prior to A.02.00
Key Path
SCPI command only
Remote Command
:HCOPy:ABORt
Initial S/W Revision Prior to A.02.00
EMI Receiver Mode Reference 271
To Next Page
Loading...
Need help?
General
