4 Input/Output Functions
Input/Output
Frequency
Lets you edit the frequency of the current row.
Key Path
Input/Output, Corrections, Edit
Notes There is no value readback on the key.
Min 0
Max 1 THz
Initial S/W Revision A.02.00
Amplitude
Lets you edit the Amplitude of the current row.
Key Path
Input/Output, Corrections, Edit
Notes There is no value readback on the key.
Min –1000 dB
Max 1000 dB
Initial S/W Revision A.02.00
Insert Point Below
Inserts a point below the current point. The new point is a copy of the current point and becomes the
current point. The new point is not yet entered into the underlying table, and the data in the row is
displayed in light gray.
Key Path
Input/Output, Corrections, Edit
Initial S/W Revision A.02.00
Delete Point
Deletes the currently-selected point, whether or not that point is being edited, and selects the Navigate
functionality. The point following the currently-selected point (or the point preceding if there is none) will
be selected.
Key Path
Input/Output, Corrections, Edit
Initial S/W Revision A.02.00
Delete Correction
Deletes the correction values for this set. When this key is pressed a prompt is placed on the screen that
says “Please press Enter or OK key to delete correction. Press ESC or Cancel to close this dialog.” The
192 EMI Receiver Mode Reference
To Next Page
Loading...
Need help?
General
