10 Monitor Spectrum Measurement
Peak Search
Next Peak Right (Remote Command Only)
Performs a Next Peak Right with the specified marker.
Remote Command
:CALCulate[1]|2:MARKer[1]|2|...|4:MAXimum:RIGHt
Example :CALC:MARK4:MAX:RIGH Performs a Next Peak Right with Marker 4.
Backwards Compatibility
Notes
Aliased to :CALCulate:MONitor:MARKer[1]|2|3|4:MAXimum:RIGHt
Initial S/W Revision A.13.00
Next Peak Left (Remote Command Only)
Performs a Next Peak Left with the specified marker.
Remote Command
:CALCulate[1]|2:MARKer[1]|2|...|4:MAXimum:LEFT
Example :CALC:MARK4:MAX:LEFT Performs a Next Peak Left with Marker 4.
Backwards Compatibility
Notes
Aliased to :CALCulate:MONitor:MARKer[1]|2|3|4:MAXimum:LEFT
Initial S/W Revision A.13.00
Delta Peak Search (Remote Command Only)
Performs a Peak Search with the specified delta marker.
Remote Command
:CALCulate[1]|2:DELTamarker[1]|2|...|4:MAXimum[:PEAK]
Example :CALC:DELT4:MAX Performs a Peak Search with Marker 4.
Backwards Compatibility
Notes
Aliased to :CALCulate:MONitor:MARKer[1]|2|3|4:MAXimum, however if the specified marker is not on
or is not a delta marker, the analyzer turns it on and makes it a delta marker.
Initial S/W Revision A.13.00
Delta Next Peak (Remote Command Only)
Performs a Next Peak with the specified delta marker.
Remote Command
:CALCulate[1]|2:DELTamarker[1]|2|...|4:MAXimum:NEXT
Example :CALC:DELT4:MAX:NEXT Performs a Next Peak with Delta Marker 4.
Backwards Compatibility
Notes
Aliased to :CALCulate:MONitor:MARKer[1]|2|3|4:NEXT, however if the specified marker is not on or is
not a delta marker, the analyzer first turns it on and makes it a delta marker.
Initial S/W Revision A.13.00
EMI Receiver Mode Reference 819
To Next Page
Loading...
Need help?
General
