3 Programming the Analyzer
List of SCPI Commands
MMEMory:STORe:SCReen:THEMe?
MMEMory:STORe:SLISt <filename>
MMEMory:STORe:STATe 1, <filename>
MMEMory:STORe:STATe <filename>
MMEMory:STORe:TRACe:DATA TRACE1 | TRACE2 | TRACE3 | ALL, <filename>
MMEMory:TRACe:CLIent "string"
MMEMory:TRACe:CLIent?
MMEMory:TRACe:CLIent:STATe ON | OFF | 1 | 0
MMEMory:TRACe:CLIent:STATe?
MMEMory:TRACe:OPERator "string"
MMEMory:TRACe:OPERator?
MMEMory:TRACe:OPERator:STATe ON | OFF | 1 | 0
MMEMory:TRACe:OPERator:STATe?
MMEMory:TRACe:PDEScription "string"
MMEMory:TRACe:PDEScription?
MMEMory:TRACe:PDEScriptionr:STATe?
MMEMory:TRACe:PDEScription:STATe ON | OFF | 1 | 0
MMEMory:TRACe:TITLe "string"
MMEMory:TRACe:TITLe?
MMEMory:TRACe:TITLe:STATe ON | OFF | 1 | 0
MMEMory:TRACe:TITLe:STATe?
OUTPut:ANALog OFF | SVIDeo | LOGVideo | LINVideo | DAUDio
OUTPut:ANALog?
OUTPut:ANALog:AUTO OFF | ON | 0 | 1
OUTPut:ANALog:AUTO?
OUTPut:AUX SIF | AIF | LOGVideo | OFF
OUTPut:AUX?
OUTPut:DBUS[1][:STATe] ON | OFF | 1 | 0
OUTPut:DBUS[1][:STATe]?
OUTPut:IQ:OUTPut IQ1 | IQ250 | OFF
OUTPut:IQ:OUTPut?
READ:APD[n]?
READ:DANalyzer [n]?
READ:FSCan[n]?
READ:MONitor[n]?
READ:SCHart [n]?
[:SENSe]:<measurement>:TRIGger:SOURce IF
[:SENSe]:<measurement>:TRIGger:SOURce
[:SENSe]:ACPR:TRIGger:SOURce
[:SENSe]:APD:ATTenuation:AUTO ON | OFF | 1 | 0
[:SENSe]:APD:ATTenuation:AUTO?
[:SENSe]:APD:DEMod AM | FM | PM | OFF
[:SENSe]:APD:DEMod?
[:SENSe]:APD:DEMod:FM:DEEMphasis OFF | US25 | US50 | US75 | US750
[:SENSe]:APD:DEMod:FM:DEEMphasis?
[:SENSe]:APD:GAIN:AUTO ON | OFF | 1 | 0
[:SENSe]:APD:GAIN:AUTO?
[:SENSe]:APD:MEAS ALL | MARKed
[:SENSe]:APD:MEAS?
[:SENSe]:APD:SWEep:TIME <time>
[:SENSe]:APD:SWEep:TIME?
[:SENSe]:APD:TRACe:ELIMit:RESet
[:SENSe]:BANDwidth|BWIDth[:RESolution] <freq>
EMI Receiver Mode Reference 85
To Next Page
Loading...
Need help?
General
