11 APD Measurement
FREQ Channel
Key Path
FREQ Channel
Remote Command
:CALCulate:APD:SLISt:APPend
Example CALC:APD:SLIS:APP
Notes If there is no free space in the signal list, you will be prompted by a message that asks whether to
continue or not: WARNING! There is not enough free space in Signal List. Would you like to clear the
Signal list before adding signals? Press ENTER to continue or ESC to Cancel.
If you send the SCPI command when there is no free space in the signal list, the application will just
clear the signal list. The information message is only for key presses.
Couplings The newly added signal will become the selected signal in the list.
Initial S/W Revision A.13.00
EMI Receiver Mode Reference 917
To Next Page
Loading...
Need help?
General
