Sound Setting
Use the [Up/Down/Left/Right] buttons
to adjust the Fader/Balance settings.
Use the [Left/Right] buttons to adjust
the Bass/Middle/Treble settings.
Press the [Default] button to reset.
(with harman/kardon)
QLS (Quantum Logic Surround)
QLS can be set by selecting from On/
Off.
(with harman/kardon)
SDVC (Speed Dependent Volume Con‐
trol)
The volume level is controlled automat‐
ically according to the vehicle speed.
SDVC can be set by selecting from On/
Off.
Touch Screen Beep
This feature is used to turn the touch
screen beep on/off.
(without harman/kardon)
SDVC (Speed Dependent Volume Con‐
trol)
The volume level is controlled automat‐
ically according to the vehicle speed.
SDVC can be set by selecting from On/
Off.
5-115
5
Audio system
To Next Page
