KDC User Manual BLUETOOTH
101
authorized people can utilize the sensitive services. The default passwords are 0000000 and
11111111.
• For PCI PTS compliance, the default passwords should be changed prior to use.
Without the default passwords change, KDC500 declines all the payment related
service requests; such as MS Card Read, IC Card Insertion, PIN Entry, etc.
Set Date/Time
In this menu, the user can set the date and time of the KDC500.
Set Self-Test
The user can set the time for the Self-Test in this menu. In PCI PTS, it requires to perform the
Self-Test(Firmware and stored key authentication) at least once in 24 hours.
Set Passwords
In this menu, the user can change the current passwords to access the Sensitive Menu.
Key Mgmt
⚫ Stored Keys : Displays all the encryption keys stored in the KDC500.
⚫ Inject Keys : In this menu, the user can inject the necessary encryption keys via Key
Loader device.
⚫ Clear Keys : In this menu, the user can clear all the encryption keys stored in the
KDC500 except the Firmware Update Authentication key which is loaded during the
manufacturing process.
Card Encrypt
This menu allows user to choose the encryption algorithm for the sensitive card data from the
list below.
⚫ Plaintext
⚫ T-DES
⚫ AES
3.6 LED Status
To Next Page
Loading...
