KDC User Manual SYNCHRONIZATION
170
6.8 iPad/iPhone/iPod Touch KTSync
The KTSync for iPad/iPhone/iPod touch provides limited functionality of PC KTSync for iPad,
iPhone and iPod touch users.
1. The KDC supports SPP and MFi Bluetooth profiles.
2. The iPhone/iPad/iPod touch should use MFi Bluetooth profiles. MFi is the default profile
of KDCi models.
3. Download the KTSync program from the App Store.
4. Enable the iPhone/iPad/iPod touch Bluetooth power from the Setting > General >
Bluetooth menu.
• Users have to disable MFi option in System > MFi menu to use HID Bluetooth
profiles.
• Users have to RESET the iPhone/iPad/iPod touch to change “HID to MFi mode”
or “vice versa” after removing previous KDC connection.
KDC with Bluetooth Spec2.1+EDR does not prompt Pin code entry menu.
KDC20i/30i/200i/250i/270i/270i/350i/400i/470i/500i
connection using MFi mode
1. Download and install KTSync from the Apple App Store.
http://itunes.apple.com/us/app/ktsync/id372916602?mt=8
2. Pair KDC and iOS Device
3. Launch KTSync and configure Settings.
iKTSync Settings
iKTSync provides following Settings menu.
• Synchronization - The user may configure Synchronization options, such as
destination of data, data formation and delimiters.
• Other settings - Users may configure KDC350 GPS module, disconnection options
and soft trigger button.
To Next Page
Loading...
