KDC User Manual SYNCHRONIZATION
168
6.7 Android aKTSync
The KTSync provides limited functionality of PC aKTSync to Android users.
• aKTSync only supports Android devices with 2.1+ OS version and that are
compatible with BluetoothChat application.
• KDC with Bluetooth Spec2.1+EDR doesn’t prompt Pin code entry menu.
KDC and Android Pairing
1. Pairing
⚫ Select SPP Bluetooth profile from the KDC ConnectDevice submenu in BT Config
menu.
⚫ Search KDCxxx from Android and pair the two devices.
⚫ If SPP2.0 is selected, KDCxxx PIN code is “0000”.
2. Connection
⚫ Click Connect icon in aKTSync.
⚫ Android will list paired
Bluetooth
devices and the user should select the target
KDC.
3. Synchronization: Provides data upload functionality to the applications.
4. Settings: The user may change various Synchronization options in the settings menu.
5. Wedging: The user may wedge barcode data to any Android application. Press the
home key and launch the target application.
Launch KTSync
1. Download and install aKTSync from the Android Play Store.
2. Change KDC Bluetooth ConnectDevice option to
SPP.
3. Execute Android
Bluetooth
device scan option and KDC
Bluetooth
pairing option.
A. Execute KDC
Bluetooth
Pairing option.
B. Launch Settings on the Android device.
C. Select Wireless and Networks.
D. Click on Bluetooth Settings.
E. Click on Scan devices.
F. The Android device will display the KDC model and 6 digits of the serial number.
4. Press the KDC list entry, enter “0000” PIN code, and press OK.
5. When paired, the Android device will display “
Paired but not connected”
.
6. Launch aKTSync program.
A. Press menu key and select the Connect option on the top left.
B. From the list of paired devices, choose the KDC to use.
C. On the top menu bar of aKTSync, you will see a message “
connecting”
, and then
“
connected”
.
D. On the KDC display, you will see “Pairing Succeeded!!!” and then “Bluetooth Connected”.
E. Select Settings option on the bottom left to change KTSync setting.
To Next Page
Loading...
