KoamTac KDC20 - MSR Config Menu - KDC415;425;430;500

KDC User Manual BLUETOOTH
96
Auto Connect
⚫ Enable/Disable KDC to reconnect to AP & Server when it detects disconnection from
AP and Server.
Send Stored
⚫ Enable/Disable KDC to send stored data when sending a new read data.
MSR Config Menu – KDC415/425/430/500
Power(KDC500 only)
⚫ Turning MSR(Magnetic-Stripe Card Reader) on or off
⚫ Options: Enabled/Disabled
Data Format(KDC415/425/430 only)
⚫ Enables/Disables whether KDC415/425/430 sends with packet data or not.
⚫ Options: Enabled/Disabled
Use Track
The user may select which track(1/2/3) data to read from the MS Card.
⚫ Track 1 : Enabled/Disabled
⚫ Track 2 : Enabled/Disabled
⚫ Track 3 : Enabled/Disabled
Null Check(KDC500 only)
The user may select which track(1/2/3) data should not be null. When this option is enabled for a
Track and the read data is null, MS Card read fail occurs.
⚫ Track 1 : Enabled/Disabled
⚫ Track 2 : Enabled/Disabled
⚫ Track 3 : Enabled/Disabled
Beep On Error
When this option is enabled, KDC makes a beep sound when it fails to read a MS card.
Encrypt MSR Data(KDC415/425/430 only)
⚫ If enabled, KDC415/425/430 sends MSR data with AES encrypted.
⚫ Options: Enabled/Disabled
AES Key length(KDC415/425/430 only)