KDC User Manual SYNCHRONIZATION
150
Automatic operation mode changes
Because it is not possible to charge the smartphone while in OTG mode, KDC470/475
automatically switches to Bluetooth mode to charge phone when
1. User plugs USB cable to KDC470/475 USB port
2. User puts KDC470/475 in the charging cradle
All transitions between OTG and Bluetooth modes are performed automatically.
OTG and Extended battery
The KDC470/475 extended battery is disabled when KDC470/475 is in OTG mode and
enabled when
1. KDC470/475 is configured as a Bluetooth mode, or
2. KDC470/475 is connected/charged via USB cable, or
3. KDC470/475 is in the charging cradle
Serial interface for iOS device
KDC470/475 communicates with iOS device via Serial interface with custom iOS case is
attached. There is no operation difference between Bluetooth and Serial communication
from iOS device perspective.
To Next Page
Loading...
