KDC User Manual FAQ
206
11.3 Battery
Q: How long will the KDC battery last before it needs to be replaced?
A: The battery on the KDC may be charged at least 300 times before it needs to be replaced.
Q: How long does it take to charge the KDC?
A: It takes about 2 hours to charge the KDC20/100/200, 4 hours to charge the
KDC30/250/300/270/280, and 5 hours to charge the KDC350/400/470/500.
Q: How many barcodes may a fully charged KDC scan?
A: If the user scans a barcode every 1 seconds, KDC100/30 scans more than 12,000 barcodes,
KDC20 scans more than 11,000 barcodes, KDC200 scans more than 8,500 barcodes,
KDC250/270L/270D scans more than 33,000 scans, KDC270C/280C/300 scans more than 22,000
scans and 2D models of KDC350/400/470/500 scan more than 40,000.
Q: How long will the KDC battery lasts in the sleep mode?
A: KDC100 lasts more than 75 days. KDC20/200 lasts more than 2 days while connected in
Bluetooth and 60 days if not connected in Bluetooth. KDC250/270L/270D lasts 7 days while
connected in Bluetooth and 120 days if not connected in Bluetooth. KDC30/270C/280C/300 last
more than 25 days while connected in Bluetooth and 5 days if not connected in Bluetooth.
KDC350 lasts more than 12 hours while Bluetooth is connected, 7 days while Bluetooth is
connected, and 20 days while GPS is not active and Bluetooth is not connected.
KDC410/415/420/425/430/470 last more than 8 days while connected in Bluetooth and 20 days
while if not connected in Bluetooth. KDC450/470 lasts more than 4 hours while reading RFiD tag
continuously every second and Bluetooth is connected, 5 days if reading RFiD tag casually and
Bluetooth is connected. KDC500 lasts more 7 days while connected in Bluetooth and 10 days if
not connected in Bluetooth.
To Next Page
Loading...
