KDC User Manual BLUETOOTH
92
This option displays
Bluetooth
Firmware Version
Wakeup Nulls
Enabled or Disabled(KDC500 doesn’t support)
BT Toggle
Enable or Disable iOS device soft keyboard or Connect/Disconnect Bluetooth. (KDC500
doesn’t support)
BT Disconnect Button
Enable or Disable Bluetooth disconnection by pressing down button for 3 seconds.
(KDC500 doesn’t support)
HID AutoLock
Disabled, 1, 2, 3, 4, 5, 10, 15 minutes(KDC500 doesn’t support)
HID Keyboard
Users may select a keyboard language in HID mode. KDC supports five languages: English,
German, French, Spanish, and Italian. (KDC500 doesn’t support)
HID Initial Delay
In this menu, users may define the initial delay between 1 second to 10 seconds before
data transmission in HID mode(KDC500 doesn’t support)
HID Inter-character Delay
This option enables users to define the inter-character delay between 10msec to 100msec
in HID mode(KDC500 doesn’t support)
HID Control Character
This option helps users to map control characters to ALT+Numlock or ^+Character_or ‘|’.
(KDC500 doesn’t support)
BT Service Menu – KDC20/30/200/250/270/300/350/400/470/500
Power
Users may choose to turn Bluetooth Power on or off. Select between Enable and Disable.
Pairing Mode
This option Enables user to enter pairing mode by simply selecting this menu.
⚫ The KDC enters into pairing mode so that the host
Bluetooth
device may search for it.
⚫ The KDC may exit pairing mode if the user presses the SCAN button or if it fails to pair
with the
Bluetooth
host device within 90 seconds.
To Next Page
Loading...
