KoamTac KDC20 - Page 91

KDC User Manual BLUETOOTH
91
IMPORTANT: We strongly recommend NOT changing these settings until the user
has fully tested the Bluetooth connection between the KDC and the host device.
For more detailed information regarding Bluetooth functionality with the KDC, please refer to
Chapter 4. Bluetooth.
ConnectDevice
You may choose the Bluetooth device type in this option.
⚫ HID normal - KDC20(i)/30(i)/200(i)/250(i)/270(i)/300(i)/350(i)/400(i)/470(i)
⚫ HID iOS - KDC20(i)/30(i)/200(i)/250(i)/270(i)/300(i)/350(i)/400(i)/470(i)
⚫ SPP2.0 - KDC20(i)/30(i)/200(i)/250(i)/270(i)/300(i)/350(i)/400(i)/470(i)
⚫ SPP - KDC20(i)/30(i)/200(i)/250(i)/270(i)/300(i)/350(i)/400(i)/470(i)/500(i)
⚫ MFi - KDC20i/30i/200i/250i/270i/300i/350i/400i/470i/500i
Auto Connect
Enabled or Disabled(KDC500 doesn’t support)
Auto Reconnect
Enabled or Disabled
Auto Power On
Enabled or Disabled(KDC500 doesn’t support)
PWR On Time
Disabled, 1 to 10 seconds(KDC500 doesn’t support)
Auto Power Off
Enabled or Disabled (KDC250G/350G should use option in system menu)
(KDC500 doesn’t support)
Beep Warning
Enabled or Disabled(KDC500 doesn’t support)
PWR Off Time
1 to 30 Minutes(KDC500 doesn’t support)
PowerOff Msg
Enabled or Disabled(KDC500 doesn’t support)
MAC Address
When users select this option, KDC displays 12 characters Bluetooth MAC Address.
FW Version