KoamTac KDC20 - Pick;Bin

185
Pick/Bin
The Pick/Bin predefined application is a special version of the Master/Slave predefined
application. The Pick/Bin application enables you to define the Pick ID and the barcode
symbology for comparison with a defined Bin.
⚫ Number of ID and Symbology
Define Pick ID characters from 1 to 32 and the barcode symbology.
Figure 47 - Master/Slave Application Flow Chart
Collation
:
Define substring to
be compared
.
Default is entire
barcode
Scan Master
Barcode
Scan Master
Barcode
Onetime
Continuous
Select MS Mode
:
(
Onetime
,
Continuous
)
Scan Check
Barcode
KDC Mode
Up or Down
Key
?
Mismatched
Matched
Up
Key
Down
Key
Scan Check
Barcode
Up or Down
Key
?
Matched
Mismatched
Up Key
?
No
Yes
Down
Key
Up
Key