KDC User Manual SYNCHRONIZATION
159
⚫ Microsoft Excel - This option means barcode data is being imported directly into
Microsoft’s Excel. Various parameters may be set when uploading data to Excel.
⚫ Select from Current Running Application – This option enables the user to select a currently
running application for data synchronization.
• Data synchronization begins immediately if “Automatically Synchronize after
Connection” is selected. If not selected, data synchronization is started
manually by the user.
• Users SHOULD NOT operate the PC during the synchronization process. It
may interrupt the process causing unreliable results.
Synchronization Methods
Fast Synchronization in Burst Mode
The KDC may synchronize data to a host device in Burst mode or Sequential mode. Burst mode
provides the fastest synchronization process but could result in error in a poor
Bluetooth
environment. Fast synchronization in Burst mode is only recommended with USB connection.
Synchronize Normal Data
If Synchronize Normal Data option is selected, the KDC will synchronize only Normal Data in
KDC memory. If the user wants all data in KDC memory synchronized, the user should select
Synchronize Normal Data and Synchronize Application Data.
Synchronize Application Data
If Synchronize Application Data option is selected, the KDC will synchronize only Application
Data in KDC memory. If the user want all data in KDC memory synchronized, the user should
select Synchronize Normal Data and Synchronize Application Data.
Clear KDC Memory after Synchronization
If this option is selected, the stored barcode data is cleared from the KDC memory after
synchronization.
⚫ It is important to clear the KDC memory periodically to prevent a Buffer Full message.
Buffer Full prevents the KDC from storing additional data. Stored barcode data may also
be deleted using the Reset Memory feature on the KDC.
Automatically Synchronize after Connection
This option lets the user automatically synchronize collected data immediately to the computer
when the KDC is connected to the host.
⚫ IMPORTANT: Before selecting this option, remember to configure all options properly.
⚫ Data synchronization may be done manually by clicking the synchronize icon if this option
To Next Page
Loading...
