KoamTac KDC20 - Predefined Applications; Master;Slave

184
7.2 Predefined Applications
KTSync provides four Predefined Applications: Master/Slave, Pick/Bin, DB Lookup and Inventory.
Master/Slave
Master/Slave predefined application enables you to define a master barcode for comparison
with one or more slave barcodes. The predefined application may be run once or continuously.
Within either setting, you may define a substring for comparison of master and slave barcodes.
Master/Slave Onetime
Define one master barcode and compare it with one slave barcode.
Master/Slave Continuous
Define one master barcode and compare it with multiple slave barcodes.
Collation Options
Works in either Onetime or Continuous Mode to compare a substring within the master and
slave barcodes.
⚫ Master start position - Select the numeric position of start substring character in Pick
barcode, 1 to 255.
⚫ Slave start position - Select the numeric position of start substring character in Pick
barcode, 1 to 255.
⚫ Comparing Barcode Length - Number of characters to be compared, 0 to 255. 0 means
all characters.
Figure 46 - Master/Slave Application Settings