BARCODE & SCAN OPTIONS
196
10. Appendix A – Barcode & Scan Options
The process for scanning and reading barcodes is delicate and complicated. Although the KDC
is equipped with a high performance scan engine, if configured incorrectly, it may not perform
at its peak performance level. To ensure its high performance, the KDC comes configured to
optimize its scan engine technology. Unless you clearly understand the impact of your changes
to the KDC settings, please do not change factory default settings.
10.1 Symbologies
KOAMTAC’s KDC products support most major barcode symbologies including 1D, 2D, Postal,
and OCR-Fonts. Below is the list of the barcode symbologies supported by the KDC with
respect to each model’s particular area of support. To ensure superior scan performance,
remember to select only the required symbologies.
KDC20/100/200/250/270L/270D/350L/
410/411/415/470L/470D/500L
KDC30/270C/280C/300/350C/420/42
1/425/450/470C/500C
EAN13, EAN8, UPCA, UPCE,
Bookland EAN, EAN13 with Addon,
EAN8 with Add-on, UPCA with Add-
on, UPCE with Add-on, Interleave 2 of
5, ITF14, Code128, Codabar, GS1-128,
Code39, Code93, & Code35
Codabar, Code11, Code32, Code39,
Code128, EAN8, EAN13, GS1-128,
I2of5, MSI, Plessey, PosiCode, GS1
DATABAR OMNI, GS1 Limited, GS1
Expanded, S2of5IA, S2of5ID, TLC39,
Telepen, Trioptic, UPCA, & UPCE
AztecCode, AztecRunes,
CodablockF,Code 16K, Code49,
DataMatrix, MaxiCode, MicroPDF,
PDF417, & QRCode and
HanXin Code
AusPost, MayadaPost, ChinaPost,
JapanPost, KoreaPost, KixPost,
Planet Code, Postnet (US), & UKPost
OCR-A, OCR-B, OCRUSCurrency,
OCRMICRE13B, & OCRSEMIFONT
Table 7 - Symbologies Supported by KDC