TABLE II: DID PANEL FAULT CODES (Cont.)
EVENT
DESCRIPTION
EVENT
RESTRICTION
DETECTION
INFORMATION
EVENT
NUMBER
Limp
Possible
Lockout
Limit
092 TCI COMMUNICATION FAULT None
Indicates message errors between
PSC and TCI.
094 ILLEGAL LIMP REQUEST None
A limp mode request is received while
truck is moving.
N/A 10
:01 inverter cutout None
Inverter cutout switch is moved
improperly (truck is moving or not in
NEUTRAL).
095 BAD BRAM BATTERY None BRAM battery voltage low. N/A 3
096 UNEXPECTED PSC CPU RESET None PSC CPU reset without request.
098 DATA STORE None PTU data store command. N/A
099 SOFTWARE EVENT None Software error N/A 3
E2-12 Electrical Propulsion System Components E02014 3/01
To Next Page
Loading...
