50 HOUR LUBRICATION AND MAINTENANCE CHECKS
MOTORIZED WHEELS - Check for correct oil level.
Refer to G.E. Motorized Wheel Service & Maintenance
Manual for lubrication specifications.
* The following checks are required
only after the
initial hours of operation
(such as: new truck com-
missioning, or a new/rebuilt component installation),
check:
*1. FUEL FILTERS - Change the Fuel Filters (Fuel
Separators).
Refer to the engine manufacturer’s maintenance
manual for fuel filter replacement instructions.
*2. HYDRAULIC SYSTEM FILTERS -
Replace filter elements only, after the initial 50 and
250 hours of operation; then at each 500 hours of
operation thereafter.
*3. FAN DRIVE ASSEMBLY - Check the torque for
the six fan mounting capscrews - 175 ft.lbs.
(237 N.m).
Truck Serial Number_______________________
Site Unit Number__________________________
Date:___________Hour Meter______________
Name of Service person______________________
COMMENTS
√’d
INITIALS
P2-6 Lubrication and Service P02034
To Next Page
Loading...
