100 HOUR LUBRICATION AND
MAINTENANCE CHECKS
* These checks are required
only after the initial
hours of operation
(such as: the commissioning
of a new truck, or after a new or rebuilt component
installation), check:
*1. HYDRAULIC SYSTEM FILTERS -
Replace filter elements only, after the
initial
100
and 250 hours of operation; then at each 500
hours of operation thereafter.
Truck Serial Number_______________________
Site Unit Number__________________________
Date:___________Hour Meter______________
Name of Service person______________________
COMMENTS
√’d
INITIALS
P02034 Lubrication and Service P2-7
To Next Page
Loading...
