17. Follow procedures in “Floating Ring Seal Assem-
bly/Installation” to install seal assembly in cavities
in the back plate and seal carrier.
18. Install seal carrier on back plate. Secure in place
with six 1/2 UNC x .75 in. socket head capscrews
to retain seal carrier in position until brake assem-
bly is installed on the truck.
FIGURE 5-9. INNER GEAR INSTALLATION
1. Cooling Oil Port
2. Brake Apply Pressure ports
3. Piston Housing
4. Shipping Bar
5. Inner Gear
6. Drain Plug
7. Capscrew & Washer
8. Capscrew and Washer
9. Spacer
10. Wear Indicator Installation Port
11. Ring Gear
FIGURE 5-10. DISC PACK INSTALLATION
1. Damper
2. Friction Disc
3. Separator Plate
4. Piston Housing
5. Piston
J05018 03/01 Disc Brake Assembly J5-9
To Next Page
Loading...
