Song Play
P0
P1 P2 P3 P7 P8 P9
111
If the “BUS Select” (8–1b) of a track for which a drum
program is selected has been set to DKit, the channel of
that track will be effective when any of the IFX1–5 tabs
has been set to All Routed, regardless of the drum kit
“BUS Select” (Global P5: 5–2b) settings or the “Drum
Kit IFX Patch” page menu command settings.
☞ For details on the master effects, refer to p.150 “8. Effect
Guide.”
9–1: Master FX
Here you can select the type of each master effect, turn it
on/off, and make chain and master EQ settings. These set-
tings are the same as in Program mode.
☞“Program 9–1:
Master FX (Master Effects).”
▼ 9–1: Page Menu Command
9–1A: Copy Master Effect
☞ “Program P9: 9–1A: Copy Master Effect.”
However, the MIDI control channel specified by “Ctrl Ch” in
the MFX1 and 2 tabs will not be copied.
9–1B: Swap Master Effect
☞ “Program P9: 9–1B: Swap Master Effect.”
However, the MIDI control channel specified by “Ctrl Ch” in
the MFX1 and 2 tabs will not be swapped.
9–2: MFX1
9–3: MFX2
Here you can set the parameters of the effects selected for
MFX 1 and 2 in the Master FX tab (
☞p.155).
Song Play P9: Master Effect
9–1
9–1A
9–1B
0–1E
9–2a
To Next Page
Loading...
Need help?
General
